DAELIM Roadwin R Service Manual

Contents

DAELIM Roadwin R Service Manual Manual pdf 36 page image

2-12INSPECTIONS / ADJUSTMENTSBRAKE PEDAL HEIGHT ADJUSTMENTLoosen the lock nut and turn the stopper bolt untilthe correct pedal height is obtained.After adjustment, tighten the lock nut securely.After adjusting the brake pedal height, inspect theoperation of rear brake light switch and brake pedal,and adjust them if necessary.BRAKE STOP SWITCHAdjust the brake stop switch by turning the adjustnut, pressing the switch so that the brake light willcome on just before the brake pedal is depressedand brake engagement begins.HEADLIGHT AIMAdjust the headlight beam vertically by turning theheadlight case adjustment bolts.CLUTCH SYSTEMMeasure the clutch lever free play at the end of theclutch lever.FREE PLAY : 10~20mmAdjust the headlight beam as specified by locallaws and regulations.An improperly adjusted headlight may blindoncoming drivers, or it may fail to light the roadfor a safe distance.BRAKE STOP SWITCHBRAKE STOP SWITCHBRAKE STOP SWITCHBRAKE STOP SWITCHBRAKE STOP SWITCHBRAKE STOP SWITCHBRAKE STOP SWITCHBRAKE STOP SWITCHBRAKE STOP SWITCHBRAKE STOP SWITCHBRAKE STOP SWITCHBRAKE STOP SWITCHBRAKE STOP SWITCHBRAKE STOP SWITCHBRAKE STOP SWITCHBRAKE STOP SWITCHSTOPPER BOLTSTOPPER BOLTSTOPPER BOLTSTOPPER BOLTSTOPPER BOLTSTOPPER BOLTSTOPPER BOLTSTOPPER BOLTSTOPPER BOLTSTOPPER BOLTSTOPPER BOLTSTOPPER BOLTSTOPPER BOLTSTOPPER BOLTSTOPPER BOLTSTOPPER BOLTThe adjustment faulty of height may caused that thebrake runs in state of operation.