2-13INSPECTIONS / ADJUSTMENTSMinor adjustments are made using the upperadjuster at the clutch lever.Loosen the lock nut and turn the adjuster.Major adjustments are performed at the clutch arm.Loosen the lock nut and turn the adjuster nut toadjust free play.Hold the adjuster nut securely while tightening thelock nut.If proper free play cannot be obtained, or the clutchslips during test ride, disassemble and inspect theclutch.SIDE STANDErect the main stand.Pull the lower end of the side stand, and see if itmoves freely.If the side stand does not move smoothly, applygrease to the pivot area.If the side stand moves too freely, check the sidestand spring.Check the axial movement of the side stand.Check the side stand switch:- Sit astride the motorcycle and raise the side stand.- Start the engine with the transmission in neutral.- Lower the side stand.The engine should not accelerate as the throttlegrip is operated.If there is a problem with the system, check theside stand switch.LOCK NUTLOCK NUTLOCK NUTLOCK NUTLOCK NUTLOCK NUTLOCK NUTLOCK NUTLOCK NUTLOCK NUTLOCK NUTLOCK NUTLOCK NUTLOCK NUTLOCK NUTLOCK NUTLOCK NUTLOCK NUTADJUSTERADJUSTERADJUSTERADJUSTERADJUSTERADJUSTERADJUSTERADJUSTERADJUSTERADJUSTERADJUSTERADJUSTERADJUSTERADJUSTERADJUSTERADJUSTERADJUSTERADJUSTERSIDE STAND SWITCH