Chapter 5 Management of Machine ParametersChapter 5 Management of Machine ParametersIn this system each design has its own settings of the normal parameters (likescale and repetition) and color-changing order. When a new design is selected, thecorresponding normal parameters and color-changing order that are saved withthe design will become effective.This system supports multi-missions at the same time. So it’s possible to set orchange the normal parameters and color-changing order of non-current designs.The entrance for the operation of those designs is at the corresponding operationscreen under the memory design management screen (Please refer to Chapter 4) .Press in the main screen to enter the window at below:As the image shows, when you move the icon to a kind of parameters, system willshow some parameters (4 at most). Press “ ”to enter the screen for setting thatkind of parameters.BECS-D16 computerized embroidery machine owner’s manual 61
