Chapter 5 Management of Machine Parameters4、 "Success to read all parameters " will appear.After the above operations, the system parameters will resume to the statusbefore user updates the software. The embroidery machine can be used now.5-8 Adjust Parameters of X＆Y Servo DriversThe type parameters are used for the machine, whose main shaft uses Dahaoservo motor and driver. Only the factory can rework these parameters. Due to thepassword-protected function, you must input the factory password, if adjusting theparameters or performing the corresponding operation to the machine. Theoperation process is as followed:1、 Press in the main screen.2、 The screen go into“Machine Parameters Operation”interface. Move cursorto “Adj Parameters of X＆Y Servo Drivers” and press “ ”to “Parametersof X＆Y Servo Drivers” window.BECS-D16 computerized embroidery machine owner’s manual 85
