Chapter 5 Management of Machine ParametersPress “X Scale” in the normal parameter screen, and the screen will show theparameter-setting window.2. Set the parameter “X Scale”Press the number panel in the parameter-setting window to change the scalingratio in X direction. The user can press to cancel the last input digit. Note:some parameter value is input by pressing .3. Press the confirmation key “ ”to save the change. Or press “ ”to exit.5.1.4 “Rep. Prior”There are two modes: X prior to Y and Y prior to X.64 BECS- D16 computerized embroidery machine owner’s manual
