Chapter 6 Assistant Operation3. Press the key “ ”to resume start point, then then system will move theframe to the start position that already saved before; press “ ”to cancel theoperation.6.1.2 Save design start1. Move the frame to the embroidery design origin.2. Follow the above instruction and enter assistant embroidery operation screen.3. Move the cursor to “Save design start” and press “ ” to activate thefollowing window:4. Press the key “ ”to save the current frame position as the origin. Press thekey “ ”to cancel the operation.6.1.3 Auto to start positionThis function is used for locating design center to the frame software center set bythe system (see 6.2.5) so that you can embroider the design to the center of theframe.BECS-D16 computerized embroidery machine owner’s manual 89
