MODELMODEL 2500_______________________________________________________2500_______________________________________________________STARTUP AND APPLICATION DOWNLOADAfter the DANIEL INDUSTRIES MODEL 2500 INSTRUMENTATION SYSTEMhas been mechanically and electrically installed, startup and application downloadprocedures can begin. For instructions, refer to Daniel Industries Manual, P/N 3-9000-590.Unless the MODEL 2500 has been supplied with a resident program at the factory,there must be a computer available (IBM PC or equivalent), which is connected tothe communications port on the Model 2500. If the MODEL 2500 has beensupplied with a resident program at the factory, a computer (IBM PC or equivalent)will not be necessary.Your software is delivered on 360 KB diskette(s) or on 3.5" diskette(s) archivedin a compressed format which cannot be directly executed until properly installed.In most cases the installed software on the hard disk will be the working copy andthe distribution diskette will serve as a backup. The following instructions enableyou to install your software on a hard drive or on another diskette.a. Insert the distribution diskette in drive A and type:A: < b. A:\>INSTALL < c. Follow the instructions on your screen.________________________________________________________________________________________________________________________________________SECTIONSECTION 33 13
