____________________________________________________________________________________________________________ MODELMODEL 25002500TYPE OF DISPLAYThe manner in which constants and variables are displayed on the MODEL 2500LCD screen indicates whether the data shown is for display only, or if data entryis also allowed. If the variable/constant name (nnnnnnnn) and status (sssssss) areon line 1 of the LCD screen, as shown in the following illustration, then data canbe entered on the keypad.nnnnnnnn sssssssvvvvvvvvvvv uuuuIf the variable/constant name (nnnnnnnn) and status (sssssss) are on line 2 of theLCD screen, as shown in the following illustration, then data is for display onlyand no data can be entered on the keypad.vvvvvvvvvvv uuuunnnnnnnn sssssssThe following illustration, which shows a display that can be changed by operatorentry:- Gives a current value of 1740.2 for the variable PLINE1.- Lists the engineering units in pounds per square inch, gauge (PSIG).- Leaves the status field blank, which indicates that the value used forPLINE1 in calculations is the live value.________________________________________________________________________________________________________________________________________SECTIONSECTION 5584
