____________________________________________________________________________________________________________ MODELMODEL 25002500SERIAL PORTSThe SERIAL PORTS sub-menu, which is the tenth sub-menu on the MAINMENU, is categorized by, and divided into one-board units and two-board units.One-board units have thirteen lower level sub-menus, which are COMMIDBAUD1, BAUD2, PORTUSE1, PORTUSE2, PARITY1, PARITY2, STOPBIT1,STOPBIT2, PRTCLSLV, PRTCLMAS, RPTGAP, and COMMWAIT.Two-board units have twenty lower level sub-menus, which are COMMID,COMMID2, BAUD1, BAUD2, BAUD3, PORTUSE1, PORTUSE2, PORTUSE3,PARITY1, PARITY2, PARITY3, STOPBIT1, STOPBIT2, STOPBIT3,PRTCLSLV, PRTCLSLV2, PRTCLMAS, RPTGAP, COMMWAIT ANDCOMMWAIT2._________________________________________________________NOTE! Applications with reports exceeding one page requirethat the printer has an 8k buffer capacity, or the baudrate of the printer output signal is lowered to 300 withthe RPTGAP lower level sub-menu set to SPACES.This note applies to BAUD1 and BAUD2 of theSERIAL PORTS sub-menu for one-board units andBAUD1, BAUD2, and BAUD3 of the SERIAL PORTSsub-menu for two-board units._________________________________________________________________________________________________________________________________________________________________________________________________SECTIONSECTION 4452