DELTA DORE CS 2000 TYXAL+ User Manual

- 12 -3. Use with your simple keypadThe keypad is used to activate or deactivate your systemfully or by zone via an access code.You also have a direct access SOS button to warn relativesthat you are in danger.3.1 Activating the system• Complete activationÊ Enter your access code (6 digits).Ë Press .The LED changes from red to green to confirm the action.• Operation by zone (1 or 2)Example: zone 2Ê Enter your access code (6 digits).Ë Press , then , then .The LED changes from red to green toconfirm the action.3.2 Deactivating the system• Complete shutdownÊ Enter your access code.Ë Press .The LED changes from red to green to confirm the action.• Shutdown by zoneExample: zone 2Ê Enter your access code.Ë Press the button, then , then .The LED changes from red to green toconfirm the action.OKON12OKON1 2LEDActivationSOS withsirenbuttonShutdownZonebuttonOKOFF12OKOFF12Wrong code entered: The keypad is locked for 90 sec-onds after five attempts with the wrong code.If there are many attempts to enter a wrong code (21attempts), an alarm cycle will be triggered.Depending on the installation settings, the alarm controlunit will or will not emit beeps to confirm the activation ordeactivation actions.