- 19 -EN5. Use with your outdoor keypadThe keypad is used to activate or deactivate your systemfully or by zone via an access code.5.1 Activating the system• Complete activationÊ Enter your access code (6 digits).Ë Press (ON).The LED changes from red to green to confirm the action.• Operation by zone (1 or 2)Example: zone 2Ê Enter your access code (6 digits).Ë Press , then (ON).The LED changes from red to green toconfirm the action.5.2 Deactivating the system• Complete shutdownÊ Enter your access code.Ë Press (OFF).The LED changes from red to green to confirm the action.• Shutdown by zoneExample: zone 2Ê Enter your access code.Ë Press , then (OFF).The LED changes from red to green toconfirm the action.OK12OK1 2 3Activate (ON) Shutdown(OFF)LEDOK12OK1 2 3Wrong code entered: The keypad is locked for 90 secondsafter five attempts with the wrong code.If there are many attempts to enter a wrong code (21attempts), an alarm cycle will be triggered.Depending on the installation settings, the alarm controlunit will or will not emit beeps to confirm the activation ordeactivation actions.