- 25 -EN6.6 Manual overrideA product may show an error (battery, open entry, etc.).In this case, the alarm control unit denies the activation. It emits aseries of beeps to warn the user.When the system is being activated, the touch screen displays:"Action rejected"then displays:"Override monitoring activation?"To override the activation, press "Yes".6.7 Triggering a discreet SOS (shut-down under duress)To do this, add 1 to the 1st digit of the access code.Example:- access code "123456", duress code "223456",- or access code "923456", duress code "023456",- press OFF (deactivates the system).The telephone transmitter calls from the 3rd number pro-grammed. The 1st and 2nd numbers are not called for the dis-creet SOS.6.8 Triggering of an SOS with sirenThis function is used to start a call with the telephone transmitter towarn relatives that you are in a situation of distress. It also sets offthe sirens with a specific tone.Ê Press the button to activate the keypad.Ë Press SOS.A 10 second countdown starts before the SOS is triggered:- a call cycle from the transmitter to the programmednumbers (starting with the 1st number).- an audible signal from an associated siren.To stop an emergency alarm with siren in progress, enter the ac-cess code and press OFF.25/11/15 12:48SettingsONEnter your codeAccess codeXXXXX6SOS Ok+1+125/11/15 12:48SOS SettingsOFFEnter your codeCancelSOS sendin10 s ...12SOS SettingsAction rejectedNo YesOverridesurveillance?This function is used to let any aggressor believe you haveentered the right access code while triggering a discreet alarm(no audible signal) with your telephone transmitter, whether thesystem is shutdown or activated.For example, this is used to activate the system even if an entryremains open or a product shows a defect (dead battery, etc.).Accessible from the home screen