DVTEL ioimage CT-5320F User And Installation Manual Manual pdf 18 page image
Manuals database logo
manualsdatabase
Your AI-powered manual search engine

DVTEL ioimage CT-5320F User And Installation Manual

Also see for ioimage CT-5320F: Quick installation guide

Page 1 previewPage 2 previewPage 3 previewPage 4 previewPage 5 previewPage 6 previewPage 7 previewPage 8 previewPage 9 previewPage 10 previewPage 11 previewPage 12 previewPage 13 previewPage 14 previewPage 15 previewPage 16 previewPage 17 previewPage 18 previewPage 19 previewPage 20 previewPage 21 previewPage 22 previewPage 23 previewPage 24 previewPage 25 previewPage 26 previewPage 27 previewPage 28 previewPage 29 previewPage 30 previewPage 31 previewPage 32 previewPage 33 previewPage 34 previewPage 35 previewPage 36 previewPage 37 previewPage 38 previewPage 39 previewPage 40 previewPage 41 previewPage 42 previewPage 43 previewPage 44 previewPage 45 previewPage 46 previewPage 47 previewPage 48 previewPage 49 previewPage 50 previewPage 51 previewPage 52 previewPage 53 previewPage 54 previewPage 55 previewPage 56 previewPage 57 previewPage 58 previewPage 59 previewPage 60 previewPage 61 previewPage 62 previewPage 63 previewPage 64 previewPage 65 previewPage 66 previewPage 67 preview
Contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Introduction
  6. Items Included in the Package
  7. Hardware Description
  8. Power Connector
  9. Camera Installation and Mounting
  10. Preparing the Cables
  11. Figure 10: Installation Step 2 Illustration
  12. Preparing the IP66 Enclosure
  13. Assembling the Camera Components
  14. Figure 20: Back Cover and White Desiccant
  15. Mounting the Camera
  16. Connecting the Camera to the Video Encoder and a DVR
  17. Accessing the Camera and Encoder on the Network
  18. Discovering the Encoder on the Network
  19. Using the Web Interface
  20. View Screen
  21. Motion Detection
  22. System Status
  23. Restore Factory Defaults
  24. System Update
  25. Camera Functions
  26. Figure 37: Auto Calibration Interval Screen
  27. Figure 39: Log Screen
  28. Setup
  29. Figure 42: FTP Server Screen
  30. Figure 43: Email (SMTP) Server Screen
  31. Figure 44: Ping Target Screen
  32. Figure 45: 802.1X Screen
  33. Figure 46: Zero Network Configuration Screen
  34. Configuring Account Settings
  35. Figure 48: Date and Time Screen
  36. Figure 49: Video Streaming Screen
  37. Figure 50: Motion Detection Screen
  38. Figure 51: Video Settings Screen
  39. Figure 52: Analog Video Output Screen
  40. Appendix
  41. Technical Specifications
  42. Connecting Leads to a Spring Clamp Terminal Block
  43. CT-5320F/CT-5640F Mounting Accessories
  44. Troubleshooting
  45. Acronyms and Abbreviations
  46. Contacting DVTEL
DVTEL ioimage CT-5320F User And Installation Manual Manual pdf 18 page image
CT-5320F/CT-5640F User and Installation Guide4Item DescriptionNetwork/PoEPortRJ45 connector to attach to a 10/100 Mbps Ethernet LAN and to power the unit viaan 802.3af PoE connection.10 Mbps LEDOff – LAN connection is not detectedSolid amber – 10 Mbps LAN connection is detectedFlashing amber – Data is being transmitted or received via the LAN connection100 Mbps LEDOff – LAN connection is not detectedSolid green – 100 Mbps LAN connection is detectedFlashing green – Data is being transmitted or received via the LAN connectionAnalog videoconnectorCoax connector to attach the camera to a NSTC or PAL video system.A 90-degree BNC adapter is pre-installed on the connector (not pictured above).Reset buttonFor resetting the camera to factory default settings. Insert a small, pointed objectinto the recess, press the button and hold for at least 6 seconds.PowerConnectorFemale terminal block connector for powering the camera by a 12/24VDC or 24VACpower adapter (minimum 13W or 0.54A, +/- 10%). A separate AC or DC maleterminal block connector should be inserted according to the power source.2.2.2 Power ConnectorTwo male connectors are provided with the unit: one for an AC power connection and one for a DC powerconnection.Figure 5: AC Power Installation Figure 6: DC Power InstallationThe connectors install in the female terminal block connector as follows:Figure 7: Terminal Block ConnectorIf you are powering the camera with an AC supply, connect AC+ to the 24VAC input and AC- to the 12VDCinput. If you are powering the camera with a DC supply, connect DC+ to the 12VDC input and DC- (or ground)to the GND input.Caution:DO NOT connect an AC supply to a DC connector. This could damage the camera.Attention:NE branchez PAS une alimentation AC à un connecteur CC. Ceci pourrait endommager lacaméra.
/ 67
Related manuals for DVTEL ioimage CT-5320F
DVTEL CT-5320F Quick Installation Manual first page preview
DVTEL CT-5320F Quick Installation Manual
DVTEL CT-5322F Quick Installation Manual first page preview
DVTEL CT-5322F Quick Installation Manual
This manual is suitable for:
ioimage CT-5320Fioimage CT-5640F
Manuals database logo
manualsdatabase
Your AI-powered manual search engine