DVTEL ioimage CT-5320F User And Installation Manual
Also see for ioimage CT-5320F: Quick installation guide
                                                                   | |
Contents
|
CT-5320F/CT-5640F User and Installation Guide28Network Setting DescriptionDNS Server Enter the IP address of the DNS server that is used in your network. Use thesame value that is used for the PCs on your LAN.Host NameThe default name is CT-5xxx-y-zF, where: xxx is the model number by focal plane array size (320 or 640) y is the frame rate in FPS z is the lens FOV and camera type is F (fixed)You can enter a friendly name for the camera.3. Click Save Changes.FTP ServerAn FTP server may be used for receiving events/alerts triggered by camera motion detection and for storingrecorded video images and files.To configure FTP server settings1. From the Setup > Network screen, select FTP Server. The FTP Server screen opens.Figure 42: FTP Server Screen2. Configure the following settings:Network Setting DescriptionFTP Server Enter the FTP Server IP address.FTP Port Enter the FTP port number used on the network. The default is 21.Username Enter the username to access the FTP Server.Password Enter the password to access the FTP Server.FTP Path Enter the FTP Path name, which is the default folder for storing the FTPserver configuration files.3. Click Save Changes to save the settings.4. Click Verify FTP Login to verify that the settings are correct. If they are correct, the message “FTPReady” is displayed next to the button. |
Related manuals for DVTEL ioimage CT-5320F
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine