DVTEL ioimage CT-5320F User And Installation Manual
Also see for ioimage CT-5320F: Quick installation guide
                                                                   | |
Contents
|
Using the Web Interface35Video Streaming SettingsThe Video Streaming screen is used to set the current date and time.To configure video streaming settings1. From the Setup > Camera screen, select Video Streaming. The Video Streaming screen opens.Figure 49: Video Streaming Screen2. To configure the video streaming settings, enter the following information:Field DescriptionEnable MulticastStreamingCheck this box to select multicast streaming. Leave the box unchecked forunicast streaming (default setting).H264 MulticastStreaming IPAddressEnter the multicast streaming address. Valid range for multicast IP addressis between 224.0.0.0 and 239.255.255.255. Typical multicast IP address is239.x.y.zH264 MulticastStreaming PortEnter the multicast streaming port number. Port number can vary between1 and 65535. Default value is 6000.H264 Bitrate LimitUse the slider to select the maximum bit rate for H.264 video. The availablerange is between 64Kbps to 5000Kbps. The bitrate and frame rate settingsautomatically control the network cache size.H264 Frame Rate From the drop-down list, select a frame rate from 5-9. The frame rate andbitrate settings automatically control the network cache size.H264 RTSP Port Enables setting a custom port for RTSP streaming. The default port is 554.H264 RTP/RTSP/HTTP Port Enter the port used for H.264 RTP/RTSP/HTTP communication. |
Related manuals for DVTEL ioimage CT-5320F
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine