Dacor EPICURE EG366 Use And Care Manual

Also see for EG366: Instruction manual Installation instructions Installation instructions Instructions Planning guide

Contents

Dacor EPICURE EG366 Use And Care Manual Manual pdf 7 page image

5Stack BurnersPut the burner rings on the burner bases as1.shown below. Match the correct sizes. Thebottom of the correct size burner ring fits insidethe top of the matching burner base.Turn the ring until it drops into place. Twist each2.ring back and forth slightly to make sure it isproperly seated.Put the burner caps on top of the burner rings.3.The ridge around the bottom edge of the capgoes around the top of the burner ring.Installing the GratesGently set the grates on top of the spill tray. Put thelegs of each grate into the corresponding dimples.On model EG366, the middle grate is larger than theother two.Setting Up Your CooktopBurner and Grate AssemblyWARNINGAssemble the burners and grates only when the cooktopis cool.Crown BurnersPut the burner heads in place as shown below.1.The locating tab on the burner head goes in thekeyed hole as shown.Put the burner rings on the burner heads as2.shown below. Match the tabs on the bottom ofthe ring to the slots on the burner head. Twisteach ring back and forth slightly to make sure itis properly seated.Put the burner caps on top of the burner rings.3.The ridge around the bottom edge of the capgoes around the top of the burner ring.Stack Burner AssemblyStep 1Step 2Step 3Ridge on bottomof burner capBurner ringBurner baseCrown Burner AssemblyStep 1SlotsTabsStep 2Step 3Ridge on bottomof burner capPut locating tabinto keyed holeBurner ringBurner headBurner baseKeyed holecontinued...