12Cart InstallationwarningAttach the appliance to the cart with all of the supplied•bolts before use.All gas and electrical connections should be made•after the grill is installed and bolted to the cart.To avoid an explosion hazard, do not connect the cart•or appliance(s) to electrical power until after the gassupply system has been checked for leaks.iMporTanTTo prevent damage to the gas regulator, install theregulator only after the appliance is mounted in itspermanent position on the cart.Remove the cart from the shipping pallet before instal-1.lation. The Dacor cart ships assembled ready forinstallation of the outdoor grill. Set the cart in an openlocation and lock the wheels on the cart to minimizemovement.Remove the drawers.2.With at least one person on each side, lift the appliance3.up and lower it onto the cart. As you lower it onto thecart slide the electrical cord into the utility cut-out.Center the unit on the cart, making sure to line up the4.threaded mounting holes under the bottom of the grillwith the holes in the top of the cart.Thread all of the supplied bolts into the bottom of the5.outdoor grill from inside the cart. Tighten the bolts intoplace.Utility cutoutRotating wheelLockingwheel Locking wheelTank shelfInsert power cordinto utility cutout36-Inch cart ShownCabinet InstallationwarningTo avoid an explosion hazard, do not connect the cart orappliance(s) to electrical power until after the gas supplysystem has been checked for leaks.iMporTanTTo prevent damage to the gas regulator, install theregulator only after the appliance is mounted in itspermanent position in the enclosure.With at least one person on each side of the unit, lift•it up and lower it into the cabinet cutout. As you lowerit into the cutout slide the electrical cord into the utilitycutout.Installation InstructionsoBsB162 oB36 oroBs36oB52 oroBs52Insert power cordinto utility cutoutInsert power cordinto utility cutout