Daewoo DF-4500P/4700P User Manual

Also see for DF-4500P: Service manual User manual

Contents

Daewoo DF-4500P/4700P User Manual Manual pdf 10 page image

INTRODUCTION5Cleaning the UnitTo clean the cabinetUse a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a milddetergent solution. Do not use strong solvents such as alcohol, benzine, or thinners, as these might damagethe surface of the unit.To obtain a clear pictureThe DVD Recorder+VCR is a high-tech, precision device. If the optical pick-up lens and disc drive parts aredirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended afterevery 1,000 hours of use. (This depends on the operating environment.) For details, please contact yournearest dealer.Remote Control Operation RangePoint the remote control at the remote sensor and press the buttons.Distance: Within 23 ft (7 m) of the remote sensor.Angle: Within 30° in each direction of the remote sensor.Remote Control Battery InstallationDetach the battery cover on the rear of the remote control, and insert two AAAbatteries. Make sure the polarities (+ and -) are aligned correctly.AAAAAACautionDo not mix old and new batteries. Never mix different types of batteries (standard,alkaline, etc.).Handling DiscsDo not touch the playback side of the disc. Hold the disc by the edgesso that fingerprints will not get on the surface. Do not stick paper ortape on the disc.Storing DiscsAfter playing, store the disc in its case.Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to directsunlight, as there may be a considerable temperature increase inside the car.Cleaning DiscsFingerprints and dust on the disc can cause poor picture quality andsound distortion. Before playing, clean the disc with a clean cloth.Wipe the disc from the centre outward.Do not use strong solvents such as alcohol, benzine, thinners,commercially available cleaners, or anti-static spray intended for oldervinyl records.Notes on DiscsAbout the Symbol‘ ‘ may appear on the TV screen during operation. This icon means the function explained in this User's Guideis not available on that specific disc.About SymbolsNoYesOverviewDF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 5 mac001 1200DPI 90LPI