SETUP27Initial Setup• Some options cannot be reset, including Parental Controls and Password.• After Restoring Defaults the unit reboots automatically and the Installation menu appears. You must set thecountry, language, channel, and clock setting again.If you wish, you can reset the DVD Recorder+VCR to its original factorysettings.1 Press [SETUP].2 Use [œ/√] to select ‘Restore Defaults ‘.3 The Initialize menu will appear. Use the […†œ √] buttons to select‘RESET‘ and press [ENTER].System InformationSystem Information helps service personnel identify key firmwareinformation about your DVD Recorder+VCR in case service is required.Restore DefaultsSystem InfoChoose OK ExitENTER SETUPœ √ …†Restore DefaultsChoose OK ExitENTER SETUPœ √ …†Version WP3000000FQ-050813Loader Version AA003 A100Micom Software 1.0.6• Default ResetDF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 27 mac001 1200DPI 90LPI