22Initial Setup1 Press [SETUP]. The Setup menu appears.While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setuppage.2 Use [œ/√] to select ‘Preferences ‘.3 While ‘Preferences ‘ is selected, press [†] to select ‘Video‘.4 Press [√]. The ‘Video‘ submenu is displayed.TV Aspect Ratio1 Use […/†] to select ‘TV Aspect‘ while the ‘Video‘ submenu isdisplayed.2 Press [√] to go to the second level.3 Use […/†] to select the desired TV Aspect.4 Press [ENTER] to confirm your selection.5 Press [SETUP] to exit the menu.4:3 PS : Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Bothsides of the picture are cut off.4:3 LB : Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above andbelow the picture.16:9 : Select when a 16:9 wide screen TV is connected.Video OutputProgressive Scan Video provides the highest picture quality with reducedflickering.Interlace or Progressive : If you connect the DVD Recorder+VCR to a digitaltelevision (DTV) or Monitor using the COMPONENT jacks, set Video Outputto ‘Interlace’ or ‘Progressive’.RGB : If you connect the DVD Recorder+VCR to a analog television usingthe SCART jacks, set Video Output to ‘RGB’.Follow the same procedure as TV Aspect Ratio to change the Video Output.CautionOnce the Progressive Scan setting is entered, an image will only be visible on a Progressive Scan compatible TV ormonitor.TV Aspect can be used only for DVD disc playback. But some kinds of DVD discs doesn’t support TV Aspect.‘Preferences’ / Video SettingsPreferences•Video TV Aspect 4:3 PSAudio Video Output InterlaceParental CtrlAuto SettingsVCRModulator OutChoose OK ExitENTER SETUPœ √ …†PreferencesVideo • TV Aspect 4:3 PSAudio Video Output 4:3 LBParental Ctrl 16:9Auto SettingsVCRModulator OutChoose OK ExitENTER SETUPœ √ …†PreferencesVideo TV AspectAudio • Video Output InterlaceParental Ctrl ProgressiveAuto Settings RGBVCRModulator OutChoose OK ExitENTER SETUPœ √ …†DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 22 mac001 1200DPI 90LPI