Daewoo DF-8150P User Manual
                                                                | |
Contents
| 
INTRODUCTION15ConnectionsConnectionsConnecting Antenna/Cable1 Disconnect the antenna/cable from the rear of yourTV.2 Connect this cable to the jack marked RF IN (FROMANT.) on the rear panel of the DVD Recorder+VCR.If your cable wire is connected to your TV without aconverter or descrambler box, unscrew the wire from your TV and attach it to the RF IN (FROM ANT.) jack on therear panel of the DVD Recorder+VCR.Use the supplied RF cable to connect between the DVD Recorder+VCR’s OUT (TO TV) jack and the antenna inputjack on your TV. With this connection, you can receive all midband, superband, and hyperband channels (allcable channels).• There are a variety of ways to connect the DVD Recorder+VCR to your TV and other equipment. Use only one ofthe connections described below. Whichever TV connection you use will work with all input sources.• Please refer to the manuals for your TV, VCR, stereo system, or other devices as necessary to make the bestconnections.• For better sound reproduction, connect the DVD Recorder+VCR’s AUDIO OUT jacks to the audio in jacks of youramplifier, receiver, stereo, or audio/video equipment. See ‘Connecting an Amplifier/Receiver‘ on page 17.Caution• Make sure the DVD Recorder+VCR is connected directly to the TV, and the TV is set to the correct video input.• Do not connect the DVD Recorder+VCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.• Do not connect the DVD Recorder+VCR via your VCR. The DVD image could be distorted by the copy protectionsystem.Antenna AntennaCable TVWall JackFlat Wire(300ohm)300/75ohm Adapter(Not supplied) OR ORRear of DVD Recorder+VCRCONNECTIONS |
Related manuals for Daewoo DF-4100P
manualsdatabase
Your AI-powered manual search engine