Daewoo DF-8150P User Manual

Contents

Daewoo DF-8150P User Manual Manual pdf 45 page image

44Total time and recorded time are displayed on the TV screen after pressing [DISPLAY]. Recorded time isdisplayed on the front panel display.Checking the Recording Time1 Press [PLAY/PAUSE] to pause the disc or tape during recording.2 When you want to continue recording, press [PLAY/PAUSE] or [REC ()] in DVD mode and press [REC ()]in VCR mode.To Pause the RecordingBasic RecordingNote• To quit One Touch Recording, press and hold [STOP] for 3 seconds.• The DVD Recorder+VCR will automatically power off when One Touch Recording ends.Tip (VCR mode only)• Always use [PLAY/PAUSE] for best results when making changes during recording.For example: To change channels during recording, first press [PLAY/PAUSE] to put the unit in Pause mode. Thenselect the desired channel on the DVD Recorder+VCR, and press [REC ()] again to resume recording.• You cannot record on the VCR deck and DVD deck at the same time.• While the VCR is recording, DVD playback is possible. However, while the DVD is recording, all VCR functions aredisabled.One Touch Recording allows you add recording time in fixed increments at the touch of a button.1 Follow steps 1-4 under Recording from TV.2 Press [REC ()] repeatedly to set the length of the recording.Recording starts after the first press. Each subsequent press increases the recording time by 15 minutes(DVD) within the available space or 30 minutes (VCR, to a maximum of 10 hours). The recording time isdisplayed on the front panel display.One Touch Record (OTR)