Daewoo DF-8150P User Manual

Contents

Daewoo DF-8150P User Manual Manual pdf 32 page image

SETUP31Initial Setup1 While ‘Preferences‘ is selected, press [†] to select ‘Auto Settings‘.2 Press [ENTER] to display the submenu.Auto Clock SetAuto Clock enables the DVD Recorder+VCR to set the clock automaticallywhenever it is in Standby mode (plugged in but powered off).Auto Clock is only available for models with the VPS/PDC function.Some broadcasting stations may send the time and date along with the VPS/PDCdata. The video will automatically use this time and date during the initial settingup procedure during normal use, and every time you switch the video off at themains. If you find that this time and date is incorrect you can remove this featureby following the steps below changing it to the OFF mode, you will then have tomanually set the time and date, see above.1 Use […/†] to select 'Auto Clock Set' and press [ENTER].2 Use […/†] to change the 'Auto Clock Set' status, and press [ENTER] to confirm.AV LinkIf your TV is AV Link available, you can download the channelsinformation from your TV set, connecting the SCART1 jack to TV.Follow the same procedure as ‘Auto Clock Set’ to set the ‘AV Link’ status.VPS/PDCVPS/PDC is a service provided by some stations to enable you to performtimer recordings precisely even if the broadcaster delays the start time ofthe programme slightly. The time you enter is the VPS/PDC time so thismust be correct. Not all stations offer VPS/PDC, in which case the playerwill start at the time you enter and not the actual start time of theprogramme.If you wish to start recording at a specific time without it being adjustedby the VPS/PDC system in the event of a delay, switch VPS/PDC offotherwise the player will not record.Follow the same procedure as ‘Auto Clock Set’ to set the ‘VPS/PDC’status.PreferencesVideoAudioParental ControlsAuto SettingsVCRInstructionsEnter-Confirm Setup-ExitMove …†PREFERENCES / Auto SettingsAuto SettingsAuto Clock Set OffAV Link OffVPS/PDC OffInstructionsEnter-Confirm Setup-Exit Move …†Auto SettingsAuto Clock Set OnAV Link OffVPS/PDC OffInstructionsEnter-Confirm Setup-Exit Move …†Auto SettingsAuto Clock Set OnAV Link OnVPS/PDC OffInstructionsEnter-Confirm Setup-Exit Move …†Select AutoClock StatusOffOnSelect AVLInk StatusOffOnSelect VPS/PDC StatusOffOn• "VPS/PDC" and "Auto Clock Set" are not provided for some countries.