20Initial SetupAuto ChapterDuring recording, chapter markers are added automatically at fixedintervals.You can set this interval to5 min,10 min or15 min.But when you set DVD Record quality “SEP”, Auto Chapter interval could beset only ‘10 min’ or ‘15 min’.To turn off automatic chapter marking, select ‘Off ‘.Follow the same procedure as ‘DVD Record Quality’.DVD Record QualityYou can set the default DVD recording quality to: HQ (High Quality - 1hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Extended Play - 4 hrs/disc) orSEP (Very Low Quality - 8 hrs/disc).1 Press [SETUP]. The Setup menu appears.While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setuppage.2 Use [œ/√] to select ‘Recording Options ‘.3 While ‘Recording Options ‘ is selected, press [†] to select ‘DVD Quality‘.4 Press [√] to move to the second level.5 Use […/†] to select the desired Record Quality (HQ,SP,EP orSEP).6 Press [ENTER] to confirm your selection, then press [SETUP] to exit the menu.VCR Record QualityYou can set the default VCR recording quality to SP (Standard Play) or LP(Long Play). SP is higher quality, but LP provides 2 times the recording time;e.g., a 2 hour tape will record for 4 hours in LP mode.Follow the same procedure as the ‘DVD Record Quality’.‘Recording Options’ SettingsRecording Options•DVD Quality HQVCR Quality SPAuto Chapter EPOverwrite SEPChoose OK ExitENTER SETUPœ √ …†Recording OptionsDVD Quality•VCR Quality SPAuto Chapter LPOverwriteChoose OK ExitENTER SETUPœ √ …†Recording OptionsDVD QualityVCR Quality•Auto Chapter OffOverwrite 05 min10 min15 minChoose OK ExitENTER SETUPœ √ …†Recording OptionsDVD QualityVCR QualityAuto ChapterOverwrite •OnOffChoose OK ExitENTER SETUPœ √ …†OverwriteImmediately begins recording over the currently selected title.DF-Q75D2D-HS-4(GB) 2006.6.2 10:7 AM ˘ ` 20 mac001 1200DPI 90LPI