RECORDING43Timer RecordingEven if a Timer Recording is set, the DVD Recorder+VCR will not record if:• No disc is loaded.• A non-recordable disc is loaded.• Disc is protected in the ‘Disc Operation’ menu; see page 46.• There are already 49 titles recorded on the disc.You cannot enter a Timer Recording if:• A recording is already under way.• The start time has already passed.• Eight Timer Recordings have already been set.If two or more Timer Recordings overlap:• You should set only one Timer Recording.• You can choose replace old Timer Recording or not.• Only one Timer recording will work.Confirmation is not possible when:• Disc is protected in the ‘Disc Operation’ menu; see page 46.• There are already 49 titles recorded on the disc.If the disc is damaged, the recording may not complete successfully, even if the Check field shows ‘Rec. OK‘.Timer Recording TroubleshootingYou can clear a Timer Recording any time before the recording actually starts.• Use […†] to select the program you want to erase on the Timer Recorder List. Press [nSTOP] to delete theprogram.Canceling a Timer RecordingAfter a Timer Recording has started, you can still cancel the program by pressing [nSTOP]. To confirm, select‘OK’. To cancel, select ‘Cancel’.Stopping a Timer Recording in ProgressTimer RecordingRecording time is overlapped withexisting entry.Replace it?OK Cancel• The Timer indicator lights on the front panel display when the DVD Recorder+VCR is ready for the TimerRecording.• The DVD Recorder+VCR will automatically power off when the Timer Recording ends.• There is a short delay when a timer recording finishes to confirm the recorded program. If two timer recordingsare set to record sequentially (one right after the other), the very beginning of the later program may not berecorded.DF-Q75D2D-HS-4(GB) 2006.6.2 10:7 AM ˘ ` 43 mac001 1200DPI 90LPI