22Initial Setup1 Press [SETUP]. The Setup menu appears.While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setuppage.2 Use [œ/√] to select ‘Preferences ‘.3 While ‘Preferences ‘ is selected, press [†] to select ‘Video‘.4 Press [√]. The ‘Video‘ submenu is displayed.TV Aspect Ratio1 Use […/†] to select ‘TV Aspect‘ while the ‘Video‘ submenu isdisplayed.2 Press [√] to go to the second level.3 Use […/†] to select the desired TV Aspect.4 Press [ENTER] to confirm your selection.5 Press [SETUP] to exit the menu.4:3 PS : Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Bothsides of the picture are cut off.4:3 LB : Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above andbelow the picture.16:9 : Select when a 16:9 wide screen TV is connected.Video OutputProgressive Scan Video provides the highest picture quality with reducedflickering.Interlace or Progressive : If you connect the DVD Recorder+VCR to a digitaltelevision (DTV) or Monitor using the COMPONENT jacks, set Video Outputto ‘Interlace’ or ‘Progressive’.RGB :Not available for this set.Follow the same procedure as TV Aspect Ratio to change the Video Output.CautionOnce the Progressive Scan setting is entered, an image will only be visible on a Progressive Scan compatible TV ormonitor.‘Preferences’ / Video SettingsPreferences•Video TV Aspect 4:3 PSAudio Video Output InterlaceParental CtrlAuto SettingsVCRModulator OutChoose OK ExitENTER SETUPœ √ …†PreferencesVideo • TV Aspect 4:3 PSAudio Video Output 4:3 LBParental Ctrl 16:9Auto SettingsVCRModulator OutChoose OK ExitENTER SETUPœ √ …†PreferencesVideo TV AspectAudio • Video Output InterlaceParental Ctrl ProgressiveAuto Settings RGBVCRModulator OutChoose OK ExitENTER SETUPœ √ …†TV Aspect can be used only for DVD disc playback. But some kinds of DVD discs doesn’t support TV Aspect.DF-Q75D2D-HS-4(GB) 2006.6.2 10:7 AM ˘ ` 22 mac001 1200DPI 90LPI