Dahua HDCVI User Manual

Also see for HCVR5204A-S2: User manual

Contents

Dahua HDCVI User Manual Manual pdf 112 page image

103Figure 4-804.10.3 Event4.10.3.1 DetectIn the main menu, from Setting->Event->Detect, you can see motion detect interface.See Figure 4-81.There is three detection types: motion detection, video loss,tampering. The video loss has no detection region and sensitivity setup and tampering has nodetection region setup. You can see motion detect icon if current channel has enabled motion detectalarm. You can drag you mouse to set motion detect region. Please click OK button tosave current region setup. Right click mouse to exit current interface. For digital channel, the detect function refers to support detection function of thefront-end and support local activation function. The front-end can getenable/disable status, sensitivity and region setup. You can get correspondingprompt if front-end can not get the above information. You can change front-endsetup if it can get.4.10.3.1.1 Motion DetectAfter analysis video, system can generate a video loss alarm when the detected movingsignal reached the sensitivity you set here.Detection menu is shown as below. See Figure 4-81. Event type: From the dropdown list you can select motion detection type. Channel: Select a channel from the dropdown list to set motion detect function.