Daikin AGZ-D Installation And Maintenance Manual

Also see for DPS: Installation and maintenance manual Installation manual Installation and maintenance manual Installation and maintenance manual

Daikin AGZ-D Installation And Maintenance Manual Manual pdf 37 page image

Installationwww.DaikinApplied.com 37 IM 1240-4 • INTELLIGENT EQUIPMENTCommissioning the Gateway in the CloudNOTE: The Intelligent Equipment User Interface works bestwith Chrome and Firefox browsers. If using InternetExplorer, you must disable compatibility mode inyour browser, as it blocks key HTML 5 features ofIntelligent Equipment. For instructions on disablingcompatibility mode, please reference InternetExplorer’s help files.In order for data to be populated on a unit’s detail pages,it must first be commissioned to the cloud application. Tocomplete this process, first log into the Intelligent Equipmentuser interface at https://ie.daikinapplied.com (Figure 78).If you have not been given access to the unit gateway,please contact Daikin Applied. Once logged in, choose theTechnician Administrator role (Figure 79). Under the ‘SitesList’, scroll down to the ‘Unassigned’ category and click,‘Quick View’ (Figure 80). Locate the desired unit from the list(Figure 81). You will notice that it has a yellow alarm status,and placing your cursor over the yellow icon indicates that ithas not been commissioned. Click the unit tag, which opensthe unit details screen (Figure 82). Click the ‘CommissioningProcedure’ button. You will then receive a message indicatingthat you have 30 days to complete the commissioningprocedure (Figure 83). Clicking the ‘Ok’ button opens the‘Commissioning Procedures’ screen for the unit (Figure84). You can complete the commissioning of the unit withinIE or outside of IE (traditional paper form). Either methodcommissions the IE gateway in the cloud. If you decide tocommission the unit outside of IE, simply click the checkboxfor ‘Commission has been performed outside IE Application’,then navigate to the bottom of the ‘General’ tab and click,‘Submit’. If using IE to commission the unit itself, complete allof the fields on each tab, then navigate to the bottom of the‘General’ tab and click, ‘Submit’.It can take up to 2 hours for all data to be pushed to thecloud and indexed. However, you should begin to see somedata within 15 minutes. To check for connectivity, wait for 15minutes, then navigate to each of the sections of the UnitDetails screen and verify that some unit data has begunto appear. If no data is present, contact Daikin Applied foradditional support.Figure 78: Intelligent Equipment User InterfaceFigure 79: Select Technician Administrator RoleFigure 80: Quick ViewFigure 81: Unit ListFigure 82: Unit Details