4 OperationOperation manual11(C)(F)TXA15~50A2V1B(W)(S)(T)Daikin room air conditioner3P485919-7C – 2017.12INFORMATION▪ Weekly timer and ON/OFF timer operation CANNOT beused at the same time. The ON/OFF timer operationtakes priority. Weekly timer will be in standby,disappears from the LCD. When the ON/OFF timer iscompleted, the Weekly timer becomes active.▪ The day of the week, ON/OFF timer mode, time andtemperature (only for ON timer) can be set with theWeekly timer. Other settings are based on previous ONtimer setting.4.6.1 To set Weekly timer operation1 Press .Result: The day of the week and the reservation number of thecurrent day are displayed.2 Press or to select the day of the week and thereservation number.3 Press .Result: The day of the week is set. and blink.4 Press or to select the mode.Result: The setting will change as follows:Display FeatureON timerOFF timerBlank Deletes reservation5 Press .Result: The ON/OFF timer mode is set. and the timeblink.Note: Press to return to the previous screen. If blank isselected, continue to step 9.6 Press or to select the time. The time can be setbetween 0:00~23:50 in 10 minutes intervals.7 Press .Result: The time is set and and the temperatureblink.Note: Press to return to the previous screen. If OFF timeris selected, continue to step 9.8 Press or to select the desired temperature.Note: The set temperature is only displayed when the mode settingis on.9 Press .Result: Temperature and time are set in ON timer. Time is setin OFF timer. Timer lamp lights orange.Result: New reservation screen will appear.10 Repeat the previous procedure to set another reservation orpress to complete the setting.11 Press to complete the setting.Result: is displayed on the LCD.Note: A reservation can be copied with same setting to another day.Refer to "4.6.2 To copy reservations" on page 11.4.6.2 To copy reservationsA reservation can be copied to another day. The completereservation of the selected day of the week will be copied.1 Press .2 Press or to select the day of the week to be copied.3 Press .Result: The reservation of the selected day of the week will becopied.4 Press or to select the destination day.5 Press .Result: The whole reservation is copied to the selected day and thetimer lamp lights orange.Note: To copy to another day, repeat the procedure.6 Press to complete the setting.Result: is displayed on the LCD.Note: To change the reservation setting after copying, refer to"4.6.1 To set Weekly timer operation" on page 11.4.6.3 To confirm reservationsYou can confirm if all reservations are set to your needs.1 Press .Result: The day of the week and the reservation number of thecurrent day are displayed.2 Press or to select the day of the week and reservationnumber to be confirmed and check the reservation details.Note: To change the reservation setting, refer to "4.6.1 To setWeekly timer operation" on page 11.