Daikin CTXA15A2V1BW Operation Manual

Also see for CTXA15A2V1BS: Installer's reference guide Installation manual Service manual Installation manual User reference guide

Contents

Daikin CTXA15A2V1BW Operation Manual Manual pdf 8 page image

4 OperationOperation manual8(C)(F)TXA15~50A2V1B(W)(S)(T)Daikin room air conditioner3P485919-7C – 2017.122 To use fixed position, press and when the flapsand louvers reach the desired position.Result: and disappear from the LCD. The flaps andthe louvers will stop moving.4.3.4 Comfort airflow and Intelligent eyeoperationYou can use Comfort and Intelligent eye operation separately, orcombine them.Comfort airflow operationThe unit will automatically change the direction of the airflow to heatup or cool down the room more effectively. Direct airflow from theunit will be less noticeable.abca Flap position in cooling and dry operationb Flap range in heating operation (vertical airflow ON)c Flap position in heating operation (vertical airflow OFF)In cooling and dryingThe airflow direction will change to spread the air along the ceiling.Comfort airflow ON Comfort airflow OFFIn heatingThe airflow direction will change to spread the air along the floor.The unit detects the room and floor temperature and automaticallyselects 1 of the 3 airflow directions.Warming up DownwarddirectionVertical airflowdirectionINFORMATIONIf you want to deactivate the Vertical airflow function (e.g.in case there is furniture or another object under the unit),refer to "To turn ON/OFF Vertical airflow function" onpage 8. If the Vertical airflow function is deactivated, theairflow will be set to downward direction.INFORMATIONPowerful and Comfort airflow operation CANNOT be usedat the same time. The last selected function takes priority.If the Vertical automatic swing is selected, Comfort airflowoperation will be cancelled.To turn ON/OFF Vertical airflow function1 Press for at least 2 seconds.Result: The menu appears on the display.2 Press or to change the menu screen.Result: The menu appears on the display.3 Press to change the setting.4 Press or to change the setting.…is blinking Vertical airflow function is…turned ONturned OFF5 To confirm the selected setting press .Note: The display automatically returns to the default screen after60 seconds. To return to the default screen sooner, presstwice.Intelligent eye operationThe system detects movement in the room and automatically adjuststhe airflow direction and temperature in order to avoid direct contactwith people. If no movement is detected for 20 minutes, the systemswitches to energy saving operation:Operation Energy saving operationHeating Temperature is lowered by 2°C.Cooling and drying If the temperature in the room is:▪ <30°C, the temperature is raised by 2°C▪ ≥30°C, the temperature is raised by 1°CFan only Decreases airflow rate.About Intelligent eye sensorNOTICE▪ Do NOT hit or push the Intelligent eye sensor. Doing somay lead to malfunction.▪ Do NOT place large objects near the Intelligent eyesensor.▪ Detection range. Up to 9 m.▪ Detection sensitivity. Changes according to location, the numberof persons in the room, temperature range, etc.▪ Detection mistakes. Sensor may mistakenly detect pets,sunlight, moving curtains, etc.To start/stop Comfort and Intelligent eye operation1 Press one or more times.Result: The setting will change as follows:Display OperationComfort airflowIntelligent eye+ Comfort airflow and Intelligent eye— Both deactivatedNote: If there are people close to the front of the indoor unit or thereare too many people, use both operations at the same time.