Daikin CTXA15A2V1BW Operation Manual

Also see for CTXA15A2V1BS: Installer's reference guide Installation manual Service manual Installation manual User reference guide

Contents

Daikin CTXA15A2V1BW Operation Manual Manual pdf 6 page image

4 OperationOperation manual6(C)(F)TXA15~50A2V1B(W)(S)(T)Daikin room air conditioner3P485919-7C – 2017.124 Press or to change the setting as follows:If the unit is… Symbol Blinks ResultIn the middle of the wall(factory default setting)≤500 mm from the wallon right≤500 mm from the wallon leftResult: The airflow range will be adjusted to avoid direct contactwith the wall.4 Operation4.1 Operation rangeUse the system in the following temperature and humidity ranges forsafe and effective operation.Operation mode Operation rangeCooling(a)(b) ▪ Outdoor temperature: –10~46°C▪ Indoor temperature: 18~32°C▪ Indoor humidity: ≤80%Heating(a) ▪ Outdoor temperature: –15~24°C▪ Indoor temperature: 10~30°CDrying(a) ▪ Outdoor temperature: –10~46°C▪ Indoor temperature: 18~32°C▪ Indoor humidity: ≤80%If operated outside the operation range:(a) A safety device might stop the operation of the system.(b) Condensation might occur on the indoor unit and drip.4.2 When to use which featureYou can use the following table to determine which features to use:Feature TasksBasic featuresOperation modes andtemperatureTo start/stop the system and to set thetemperature:▪ Heat up or cool down a room.▪ Blow air in a room without heating orcooling.▪ Decrease the humidity in a room.▪ In Automatic mode, automaticallyselect an appropriate temperatureand operation mode.+ AirflowdirectionTo adjust the airflow direction (swing orfixed position).Feature TasksAirflow rate To adjust the amount of air blown intothe room.To run more quietly.Advanced featuresStreamer To remove airborne allergens such asmold, pollen, adjuvant substances,viruses, bacteria…Econo To use the system when you are alsousing other power-consumingappliances.To save energy.Outdoor unit quiet To decrease the noise level of theoutdoor unit. Example: At night.Comfort To automatically adjust the airflowdirection to cool down or heat up theroom more effectively.Intelligent eye To prevent the air from coming in directcontact with people.To save energy when nobody is in theroom.Powerful To cool down or heat up the roomquickly.ON timer + OFFtimerTo automatically turn ON or OFF thesystem.Weekly timer To automatically turn ON or OFF thesystem on a weekly basis.Additional featuresWireless LAN connection To operate the unit using smartappliances.4.3 Operation mode and temperaturesetpointWhen. Adjust the system operation mode, and set the temperaturewhen you want to:▪ Heat up or cool down a room▪ Blow air in a room without heating or cooling▪ Decrease the humidity in a roomWhat. The system operates differently depending on the userselection.Setting DescriptionAutomatic The system cools down or heats up aroom to the temperature setpoint. Itautomatically switches between coolingand heating if necessary.Drying The system decreases the humidity in aroom without changing the temperature.Heating The system heats up a room to thetemperature setpoint.Cooling The system cools down a room to thetemperature setpoint.Fan The system only controls the airflow(airflow rate and airflow direction).The system does NOT control thetemperature.Additional info:▪ Outside temperature. The system's cooling or heating effectdecreases when the outside temperature is too high or too low.