SiUS12-814 Introductionxi1.2 Using IconsIcons are used to attract the attention of the reader to specific information. The meaning of eachicon is described in the table below:Be sure to measure the insulation resistance after the repair, and make surethat the resistance is 1 MΩ or higher.Faulty insulation may cause an electrical shock.Be sure to check the drainage of the indoor unit after the repair.Faulty drainage may cause the water to enter the room and wet the furnitureand floor.Do not tilt the unit when removing it.The water inside the unit may spill and wet the furniture and floor.Be sure to install the packing and seal on the installation frame properly.If the packing and seal are not installed properly, water may enter the room andwet the furniture and floor.For unitary typeonlyCautionIcon Type ofInformation DescriptionNote:Note A note provides information, techniques, and tips to bestunderstand and utilize the equipment.CautionCaution Indicates a potentially hazardous situation which, if not avoided,may result in minor or moderate injury. It may also be used toalert against unsafe practices that may cause property damage.WarningWarning Indicates a potentially hazardous situation which, if not avoided,could result in death or serious injury. This signal word shouldnot be used for property damage hazards unless personal injuryrisk appropriate to this level is also involved.Reference A reference guides the reader to other places in this binder or inthis manual, where he/she will find additional information on aspecific topic.
