Main Functions SiUS12-81434 Function and Control1.9 HOME LEAVE OperationOutline Addressing the customer's need for immediate heating and cooling of the room after returninghome, or for house maintenance, you may switch the temperature and air volume from normaltime to outing time by one touch. This function also stabilizes irregular cooling or heating. .Details of theControl1. Start of FunctionThe function starts when the [HOME LEAVE] button is pressed in cooling mode or heating mode(including stopping and powerful operation). If this button is pressed while the operation is stopped,the function becomes effective when the operation is started. If this button is pressed in powerfuloperation, the powerful operation is reset and this function becomes effective. The [HOME LEAVE] button is ineffective in dry mode and fan mode.2. Details of FunctionA mark representing [HOME LEAVE] is indicated on the liquid crystal display of the remotecontroller. The indoor unit is operated according to the set temperature and air volume for HOMELEAVE which were preset in the memory of the remote controller.The LED (Red) of indoor unit representing [HOME LEAVE] lights up. It goes out when the operationis stopped.3. End of FunctionThe function ends when the [HOME LEAVE] button is pressed again during [HOME LEAVE]operation or when the powerful operation button is pressed.Others The set temperature and set air volume are stored in the remote controller. When the remotecontroller is reset due to replacement of battery, it is necessary to set the temperature and airvolume again for [HOME LEAVE].
