IM 1125-7 • REBEL ROOFTOPS 104 www.DaikinApplied.comWarranTy regIsTraTIon forMWarranTy regIsTraTIon forM13F-4157 (05/15) ©2015 Daikin Applied • (800) 432-1342 • www.DaikinApplied.comRebelEquipment Warranty Registration FormTo comply with the terms of Daikin Applied Warranty, complete and return this formwithin 10 days to the Warranty Department of Daikin Applied.Check, test, and start procedure for Rooftop roof mounted air conditioners with or without heatrecovery and roof mounted air handlers.GENERAL INFORMATIONJob Name: ____________________________________________________________ GOI No.: _______________________________Installation address: _____________________________________________________________________________________________City: _________________________________________________________________ State: _________________________________Purchasing contractor: ___________________________________________________________________________________________City: _________________________________________________________________ State: _________________________________Name of person doing start-up: ____________________________________________________________________________________Company name: ________________________________________________________________________________________________Address: ______________________________________________________________________________________________________City/State/Zip: __________________________________________________________________________________________________UNIT INFORMATIONUnit model number:______________________________________________________________________________________________Unit serial number: ______________________________________________________________________________________________Compressor 1 model number: ____________________________________________ Serial number: __________________________Compressor 3 model number: ____________________________________________ Serial number: __________________________NOTE: 1. Unit does not require high pressure switch testing2. Refrigerant pressures can be checked from the MT III controller. Refrigerant gages are not needed.3. Ensure proper unit phasing.4. Compressor 3 might not operate during startup due to ambient conditions and compressor operating envelope.