SiBE01-829 InstructionsOperation Manual 392.5 Adjusting the Airflow Direction12Adjusting the Airflow DirectionYou can adjust the airflow direction to increase your comfort. To adjust the horizontalblades (flaps)1. Press “SWING button”.• “ ” is displayed on the LCD and the flaps willbegin to swing.2. When the flaps have reached thedesired position, press “SWINGbutton” once more.• The flap will stop moving.• “ ” disappears from the LCD. To adjust the vertical blades(louvers)Hold the knob and move the louvers.(You will find a knob on the left-side and the right-sideblades.)• When the unit is installed in the corner of a room,the direction of the louvers should be facing awayfrom the wall.If they face the wall, the wall will block off the wind,causing the cooling (or heating) efficiency to drop.Notes on flaps and louvers angles• When “SWING button” is selected, theflaps swinging range depends on theoperation mode. (See the figure.) ATTENTION• Always use a remote controller to adjust theflaps angle. If you attempt to move it forciblywith hand when it is swinging, themechanism may be broken.• Be careful when adjusting the louvers.Inside the air outlet, a fan is rotating at ahigh speed.MODESLEEPSETCLRON TIMERCLRSETOFF TIMEROFFONPMAM˚CûFAUTOP1P21, 2Upper limit 50˚Upper limit 65˚Lower limit 105˚Lower limit 70˚In COOL, DRY, and FAN modeIn HEAT modeWhen stopoperationWhen stopoperation