SiBE01-829 InstructionsOperation Manual 4720[ Maintenance ]1. Remove dust with a vacuum cleaner and wash lightly with water.2. If it is very dirty, soak it for 10 to 15 minutes in water mixed with aneutral cleaning agent.3. Do not remove filter from frame when washing with water.4. After washing, shake off remaining water and dry in the shade.5. When shaking off remaining water, do not wring the filter.[ Replacement ]1. Remove the tabs on the filter frame and replacewith a new filter.• Dispose of old filters as non-flammable waste.NOTECheck Before a long idle period1. Operate the “FAN only” for several hours on a fine day to dry out theinside.• Press “MODE selector button” and select “FAN” operation.• Press “ON/OFF button” and start operation.2. After operation stops, turn off the breaker for the room air conditioner.3. Clean the air filters and set them again.4. Take out batteries from the remote controller.• Operation with dirty filters:(1) cannot deodorize the air. (2) cannot clean the air.(3) results in poor heating or cooling. (4) may cause odour.• To order Air purifying filter with bacteriostatic, virustatic functions contact to the serviceshop there you bought the air conditioner.• Dispose of old filters as non-flammable waste.Check that the base, stand and other fittings of the outdoor unit are not decayed or corroded.Check that nothing blocks the air inlets and the outlets of the indoor unit and the outdoor unit.Check that the drain comes smoothly out of the drain hose during COOL or DRY operation.• If no drain water is seen, water may be leaking from the indoor unit. Stop operation andconsult the service shop if this is the case.TabItem Part No.Air purifying filter with bacteriostatic, virustaticfunctions (without frame) 1 set KAF992A42