SiBE01-829 InstructionsOperation Manual 452.11 Care and Cleaning18CARECare and CleaningCAUTION Indoor unit, Outdoor unit and Remote controller1. Wipe them with dry soft cloth. Front panel1. Open the front panel.• Hold the panel at the recesses onthe main unit (2 recesses on rightand left sides) and lift it until it stops.2. Remove the front panel.• While lifting the front panel further,slide it to the right and pull it to thefront side. The left rotating shaft isdetached. Slide the right rotatingshaft to the left and pull it to the frontside to remove it.3. Attach the front panel.• Align the right and left rotating shaftsof the front panel with the groovesand push them all the way in.• Gently close the front panel. (Pushboth ends and the center on the frontpanel.)CAUTIONUnits• Don’t touch the metal parts of the indoor unit. If you touch those parts, this may cause aninjury.• When removing or attaching the front panel, use a robust and stable stool and watch yoursteps carefully.• When removing or attaching the front panel, support the panel securely with hand to preventit from falling.• For cleaning, do not use hot water above 40˚C, benzine, gasoline, thinner, nor other volatileoils, polishing compound, scrubbing brushes, nor other hand stuff.• After cleaning, make sure that the front panel is securely fixed.Before cleaning, be sure to stop the operation andturn the breaker OFF.Recess onmain unitRotatingshaft