Instructions SiBE01-82946 Operation Manual191. Open the front panel. (page 18.)• Hold the panel at the recesses on themain unit (2 recesses on right and leftsides) and lift it until it stops.2. Pull out the air filters.• Push a little upwards the tab at the center of each air filter, then pull it down.3. Take off the Air purifying filterwith bacteriostatic, virustaticfunctions.• Hold the recessed parts of the frameand unhook the four claws.4. Clean or replace each filter.See figure.• When shaking off remaining water, donot wring the filter.5. Set the air filter and Airpurifying filter withbacteriostatic, virustaticfunctions as they were andclose the front panel.• Insert claws of the filters into slots of thefront panel. Close the front panel slowlyand push the panel at the 3 points.(1 on each side and 1 in the middle.)• The air filter and the Air purifying filter with bacteriostatic, virustatic functions have asymmetrical form in the horizontal direction. Air Filter1. Wash the air filters with water or clean them withvacuum cleaner.• If the dust does not come off easily, wash them with neutraldetergent thinned with lukewarm water, then dry them up in theshade.• It is recommended to clean the air filters every two weeks. Air purifying filter with bacteriostatic, virustaticfunctionsThe Air purifying filter with bacteriostatic, virustatic functions can be renewed by washing it withwater once every 6 months. We recommend replacing it once every 3 years.FiltersRecess onmain unitAir filterFilter frameTabAir purifying filter withbacteriostatic,virustatic functionsFRONT