SiK401004_A45 FUNCTION CONTROL3.4.5 Swing Control Function *Under on-state of unit, press Function button till the unit enters swing control function andthen press “Enter/Cancel“ button to turn on “swing” control function.During swing function, press Function button till the unit enters swing control function andthen press Enter/Cancel button to cancel swing control function.Swing control function setting is shown in Fig 3.4.5Fig.3.4.53.4.6 Timer SettingPress Timer button to set timer off of the unit. Under off-state of the unit, press Timerbutton to set timer on of the unit in the same way.Timer on setting: Under off-state of the unit without timer setting, if Timer button ispressed, LCD will display xx. Hour, ON blinking. In this case, press ▲or ▼ button to adjust timer on and then press Timer to confirm. If Modebutton is pressed before pressing Timer button to confirm, timer modewill be switched to timer off setting mode. In this case, LCD displays xx.Hour, OFF blinking. In this case, press ▲ or ▼ button to adjust timer offand then press Timer to confirm. When LCD displays xx. Hour On Off,xx. Hour means time of timer on, but time of timer off won’t bedisplayed.Timer off setting: Under on-state of the unit without timer setting, if Timer button ispressed, LCD will display xx. Hour, OFF blinking. In this case, press ▲or ▼ button to adjust timer on and then press Timer to confirm. If Modebutton is pressed before pressing Timer button to confirm, timer modewill be switched to timer on setting mode. In this case, LCD displays xx.