SiK401004_AFUNCTION CONTROL 523.4.12 Blow Function SettingBlow function: After the unit is turned off, water in evaporator of indoor unit will beautomatically evaporated to avoid mildew.In cooling and dry mode, press Function button till the unit enters blow function, BLOWblinking, and then press Enter/Cancel button to turn on this function.In blow mode, press Function button till the unit enters BLOW function and then pressEnter/Cancel button to cancel this function.BLOW function setting is shown in Fig.3.4.12Fig.3.4.12 Blow function settingNote:1.After setting BLOW function, turn off the unit by pressing On/Off button on remotecontroller, indoor fan will run at low fan speed for 10 min. (BLOW shows). Meanwhile, ifBLOW function is canceled indoor fan will be turned off directly.2.There is not BLOW function in fan or heating mode.
