123456OFFENGLISHCONTROL BOARDBUTTONON/OFFDISPLAY OF VARIOUSTEXT MESSAGESTO ACCESSTHE MENUTEMPERATURESETTINGOPERATING POWERADJUSTMENTDISPLAY ICONSIndicates the receipt of the radio signalOn = during radio communicationOff = no radio communicationFlashing = excluded serial portIndicates the stove modulationOn = the stove is working at the set powerFlashing = the power at which the stove is working is different tothe power set, the stove is modulating (for various reasons)Indicates the presence of an alarm.On: indicates the presence of an alarmOff: indicates the absence of alarmsFlashing: indicates the deactivation of the depression sensor.It indicates weekly programming functioningIndicator on = Weekly programming activeIndicator off = Weekly programming not activeIndicates the water temperature statusOff = the T° read by the probe is over the set temperature setOn = the T° read by the probe is below the set temperature setIndicates the contact of the external additional thermostatOn = closed contact: the contact of the external additionalthermostat is closed.On = open contact: the contact of the external additionalthermostat is open.Flashing with closed contact: the contact of the external additionalthermostat is closed and the STBY function is activatedFlashing with open contact: the contact of the external additionalthermostat is open and the STBY function is activatedIt indicates functioning of the fumes motor.Off = flue gas motor deactivatedOn = flue gas motor activeFlashing = breakdown (contact technical after-sales service)-It indicates functioning of the tangential fan (where present)Off = not workingOn = workingFlashing = motor at minimum-It indicates functioning of the pellet feed motor.Off = pellet feed motor deactivatedOn = pellet feed motor active.-It indicates pump functioningOff = pump deactivatedOn = pump activeFlashing = the safety device is active (H2O temperature > 85°C)-59
