ENGLISHDISPLAYSDISPLAY REASON MEANINGSTART The start phase is in progress _PELLET FEEDINGthe continuous feeding of the pelletsduring the ignition phase is inprogress_IGNITION The ignition phase is in progressSTART-UP The start-up phase is in progress _BURN POTCLEANINGThe automatic burn pot cleaning is inprogress _FINAL CLEANING The final cleaning is in progress _STAND-BYCOOLINGStart-up attempt while the stove is stillin cooling modeEvery time the stove displays one of the alarms listed above it will switch-off automatically.The alarm can only be released using button 1 when it switch-off hasbeen completed. The stove can only be switched back on when itcompletely coldWORKThe normal operating phase is inprogress, the stove is operating at theset power-MODULATION the stove is operating at minimum -STAND - BY Stove off waiting for re-ignition dueto an external thermostatThe stove will only re-start when the external thermostat willrequest itSTDBY-BLACK OUT The stove is cooling after a power cut. Once cooling is complete, it will automatically igniteROOM T Displays room temperature (in themodels where provided) -HOFF Stove off due to water temperatureover setAs soon as the water temperature drops below the set parameters,the stove will switch back onANTI-FREEZEThe anti-freeze function is in progressas the H2O t° is below the factory setthresholdthe pump is active until the water reaches the pre-set factoryparameter +2°CANTILOCKThe pump anti-locking function is inprogress (only if the stove has been inOff status for at least 96 hours)the circulator is activated for the amount of time set by themanufacturer to prevent it from locking74
