CamExpert panes 25CAMERA OPERATION 28FACTORY SETTINGS 28CHECK CAMERA AND SENSOR INFORMATION 28VERIFY TEMPERATURE 29SAVING AND RESTORING CAMERA SETTINGS 29CAMERA LINK CONFIGURATION 31TRIGGER MODES 32EXPOSURE CONTROLS 32EXPOSURE MODES IN DETAIL 33SET LINE RATE 35SET EXPOSURE TIME 36CONTROL GAIN AND BLACK LEVEL 36SET IMAGE SIZE 37SET BAUD RATE 37PIXEL FORMAT 38BINNING 38CAMERA DIRECTION CONTROL 38PIXEL READOUT DIRECTION (MIRRORING MODE) 38RESETTING THE CAMERA 39CALIBRATING THE CAMERA 39Calibration 40APPENDIX A: GENICAM COMMANDS 43CAMERA INFORMATION CATEGORY 43Camera information feature descriptions 44Camera configuration selection dialog 47Camera power-up configuration 47User set configuration management 47CAMERA CONTROL CATEGORY 48Camera control feature descriptions 48Digital I/O control feature descriptions 52FLAT FIELD CATEGORY 54Flat field control feature description 54IMAGE FORMAT CONTROL CATEGORY 56Image format control feature description 57TRANSPORT LAYER CONTROL CATEGORY 58Transport Layer feature descriptions 59SERIAL PORT CONTROL CATEGORY 60Serial Port control feature descriptions 60FILE ACCESS CONTROL CATEGORY 61File Access Control feature descriptions 62File Access via the CamExpert tool 63Download a list of camera parameters 64APPENDIX B: ASCII COMMANDS 66Port configuration 67Commands 68
