Dalsa Piranha4 User Manual

Also see for P4-CC-08K03T-01-R: User manual

Contents

Dalsa Piranha4 User Manual Manual pdf 88 page image

88 Piranha4 8k Color Camera User's Manual03-032-20274-00 Teledyne DALSAAppendix F: Camera, FrameGrabber CommunicationSetting up communication between the camera and the framegrabberTeledyne DALSA Camera Link cameras support the GenCP Camera Link standards.To configure Teledyne DALSA GenCP Camera Link Cameras:1. Install the Teledyne DALSA frame grabber in the host computer; refer to thehardware installation manual.2. Install Sapera LT and the Teledyne DALSA frame grabber driver.3. Connect the camera to the frame grabber; refer to the camera installation manual.4. Power up the camera and wait until the status LED is solid green.5. Run the Sapera Configuration utility and select the frame grabber serial portconnected to the camera. Set Teledyne DALSA camera detection to AutomaticDetection and Baud rate to Auto Detect & Maximize.6. If the camera will be configured using three-letter text commands via a terminalprogram, such as HyperTerminal, then set COM port mapping (optional) to anavailable COM port (e.g. COM2).