54 Piranha4 8k Color Camera User's Manual03-032-20274-00 Teledyne DALSAFlat Field CategoryThe Flat Field controls, as shown by CamExpert, group parameters used to configurecamera pixel format, and image cropping. Additionally a feature control to select and outputan internal test image simplifies the process of setting up a camera without a lens.Parameters in gray are read only, either always or due to another parameter being disabled.Parameters in black are user set in CamExpert or programmable via an imaging application.Features listed in the description table but tagged as Invisible are usually for TeledyneDALSA or third party software usage—not typically needed by end user applications.Flat field control feature descriptionThe following table describes these parameters along with their view attribute and minimumcamera firmware version required. Additionally the firmware column will indicate whichparameter is a member of the DALSA Features Naming Convention (DFNC), versus theGenICam Standard Features Naming Convention (SFNC not shown).The Device Version number represents the camera software functional group, not afirmware revision number.
