QuickCam User's Manual 4003-032-10187-04 DALSA corp.Note: There is one clock cycle between the output signal of a pulse generator andthe outputs of the GPIO Control Block.The labels for the inputs from the pulse generators in the GPIO Control Blockprogramming languages are:• I7, for pulse generator 0• I6, for pulse generator 16.6 RescalerTo configure the Rescaler, click the Advanced… button on the Exposure/GPIOtab in the Camera Configuration dialog box and open the Device Features tab.QuickCam has a rescaler module that can be used to rescale a periodic inputsignal. The signal output is resynchronized based on the rescaler settings.The rescaler is defined by the following settings:GranularityThe granularity is the number of clock cycles during which the rescaler checksfor activity on its input. The value to use depends on the period/frequency of the
