Dalsa QuickCam User Manual
                                                                                     | |
Contents
| 
7 QuickCam User’s Manul03-032-10187-04 DALSA corp.2Installing, Connecting,Detecting, and Saving2.1 Installing QuickCam and Camera DriversTo install QuickCam:1. Insert the camera CD into your CD-ROM drive.If the installation wizard does not start automatically, click Start on theWindows taskbar, and click Run. Type D:\Setup, where D is the letter thatcorresponds to your CD drive.2. Click Install QuickCam and follow the online instructions to complete theinstallation.Installing Drivers for Your CameraIf you are using a Spyder3 GigE camera, you must install drivers beforerunning QuickCam.Before installing drivers, ensure that your PC is equipped with a GigE networkinterface (also referred to as a network adapter) based on Intel’s 82540 chip.Many motherboard manufacturers are designing this chip directly into theirboard in “LAN on the motherboard (LOM)” implementations. Alternately, anIntel 82540-based network adapter, also known as a network interface card, canbe slotted into a PC.To install Spyder3 GigE drivers:1. Open the Driver Installation Tool. On the Windows task bar click Start,point to Programs Æ DALSA QuickCam Æ Tools Æ Launch DriverInstallation Tool.If you are using an Intel PRO/1000 adapter:a) On the Pro 1000 Adapters tab, right click on an Intel PRO/1000network interface card adapter with no installed driver (i.e. whenthe Device Class is Ethernet Controller).The following context menu appears: |
Related manuals for Dalsa QuickCam
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine