QuickCam User's Manual 6203-032-10187-04 DALSA corp.Under Test Pattern:2. Select the video mode to use from the list in the Camera dropdown box orthe Ethernet dropdown box.8.6 Troubleshooting: Using the DiagnosticsTabCommunications and Verify ParametersTo quickly verify serial communications, check the Diagnostics tab.Communication is working properly if the camera settings are properlydisplayed in the Camera Settings section.Verify VoltageTo check the camera’s input voltage, refer to the Temperature/Voltage section onthe Diagnostics tab. If it is within the proper range, the camera returns OK> andthe voltage value. Otherwise the camera returns an error message.Verify TemperatureTo check the internal temperature of the camera, refer to theTemperature/Voltage section on the Diagnostics tab. The camera will shut itselfdown if the internal temperature exceeds 75°C.Verify Signal FrequencyTo verify the signal frequency, refer to the Signal Frequency section on theDiagnostics tab. Use the drop down list to select the control signal and reviewthe signal frequency. The control signals available for measuring are: CC1(EXSYNC), CC2 (PRIN), CC3 (CCD Direction), and CC4 (Spare).
