Figure 7.1: Mounting Template7.1.4 LiftingAlways lift the adjustable frequency drive using the dedicated lifting holes. For all D and E2 (IP00) enclosures, use a bar to avoid bending the lifting holesof the adjustable frequency drive.Figure 7.2: Recommended lifting method, frame sizes D and E .NOTE!The lifting bar must be able to handle the weight of the adjustable frequency drive. SeeMechanical Dimensions for the weight of thedifferent frame sizes. Maximum diameter for bar is 1 in [2.5 cm]. The angle from the top of the drive to the lifting cable should be 60degrees or greater.7 Mechanical Installation - Frame size D, E andF FC 300 Design Guide7-2 MG.33.BC.22 - VLT® is a registered Danfoss trademark7
