Framesize Unit type Dimension for disconnect terminalE2IPOO/CHASSIS A B C D E F350/450 hp [250/315 kW] (400 V) AND500/600–675/850 hp [355/450–500/630 KW](690 V)381 (15.0) 245 (9.6) 334 (13.1) 423 (16.7) 256 (10.1) N/A450/500–550/600 hp [315/355-400/450 kW](400 V) 383 (15.1) 244 (9.6) 334 (13.1) 424 (16.7) 109 (4.3) 149 (5.8)7.2.5 Terminal Locations - Frame size FNOTE!The F frames have four different sizes, F1, F2, F3 and F4. The F1 and F2 consist of an inverter cabinet on the right and rectifier cabineton the left. The F3 and F4 have an additional options cabinet left of the rectifier cabinet. The F3 is an F1 with an additional optionscabinet. The F4 is an F2 with an additional options cabinet.Terminal locations - Frame size F1 and F3Figure 7.22: Terminal locations - Inverter Cabinet - F1 and F3 (front, left and right side view). The connector plate is 1.65 in [42 mm] below .0 level.1) Earth ground bar2) Motor terminals3) Brake terminalsFC 300 Design Guide7 Mechanical Installation - Frame size D, E andFMG.33.BC.22 - VLT® is a registered Danfoss trademark 7-197
